The Sonic Shock 5 is an anti theft device that is an excellent solution for projectors, televisions, and computers or any equipment that has a
2 x 3.8 inch (5 x 10 cm) clear flat surface for mounting.
The Alarm Module is 2 x 3.8 inches x 1.3 inches high (5 x 10 cm x 0.33 cm high) It’s thin enough to be attached to the back of most wall mounted flat panel televisions.
It has a Standard Sensor Tether which is 10 foot / ~ 3 meter cable + 1 foot / ~30 cm diameter loop
The Full Kits comes with:
Alarm module
Mounting plate
Electronic tether (Either Standard Sensor or Anchor Point Sensor)
Ilco removable core lock
9 volt industrial alkaline battery
Installation & User Guide
Methyl methacrylate glue kit
2 keysCommercial kits have all the above EXCEPT glue and keys.
Mounting plate
Electronic tether (Either Standard Sensor or Anchor Point Sensor)
Ilco removable core lock
9 volt industrial alkaline battery
Installation & User Guide
Methyl methacrylate glue kit
2 keysCommercial kits have all the above EXCEPT glue and keys.
1 glue cartridge will usually cover for every four Sonic Shock 5 alarms.
The alarm is .05 inches / 1mm thick 18awg brushed stainless steel. The plate is .23 inches / 5.7mm carbon fiber polycarbonate.
The lock is a Ilco 5 wafer cam lock.
It comes with a 9v alkaline battery which will last 5yrs in monitoring mode and 2hrs in full alarm.
The alarm is .05 inches / 1mm thick 18awg brushed stainless steel. The plate is .23 inches / 5.7mm carbon fiber polycarbonate.
The lock is a Ilco 5 wafer cam lock.
It comes with a 9v alkaline battery which will last 5yrs in monitoring mode and 2hrs in full alarm.
